| 翻訳と辞書 |
| cleaving axe ： ウィキペディア英語版 |
cleaving axe
A cleaving axe or cleaver is a form of axe used within green woodworking to split wood lengthways. Cleaving (riving) is used to turn a log into lumber or billets (short or thick pieces of wood) into firewood. Splitting axe is sometimes described as an old name for a splitting maul〔http://northernwoodlands.org/knots_and_bolts/maul_vs_axe Maul vs. Axe〕 or froe.
==Overview==
A cleaving axe resembles a felling axe but is heavier, more wedge shaped, not sharp-edged and the pole is flat for driving wedges.〔(Schlich, William, and William Rogers Fisher. ''Schlich's manual of forestry: Volume V: Forest Utilization''. 2nd ed. London: Bradbury, Agnew, 1908. 198. Print. )〕 The edge is of medium length, almost straight with just a slight camber, and symmetrical top and bottom. A section through the edge is that of a simple splitting wedge.〔Abbott, Green woodwork, p. 42〕 The edge itself does not need to be sharp: ''cleaving'' relies more on wedge action than ''chopping'' (cutting) with an edge. The section of the axe should be triangular though, with flat sides, rather than the deeply hollow-sided forged and welded axes, or the modern convex-sided "apple pip" axe grind. Nor should the edge be ground at a bevel. The work of using the axe, and its ability to split cleanly, depends on having flat sides with the minimum of friction, rather than all the force of the timber being concentrated on one protruding line.〔 The handle is straight and fairly short, around 18 inches, as the cleaving axe is only held, not swung.〔 As the axe head must penetrate fully into the wood, the poll〔The ''poll'' is the rear face of an axe, sometimes flat but only rarely intended for hammering.〕 is minimal, narrower than the axe cheeks, and is never used for pounding other tools, lest it damage or mushroom the head.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「cleaving axe」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|